Scissor Lift WP-3-10
$24,977 (10M Version)
Working Load: 320Kg
Working Height: Models From 6 to12m
Platform Size: 2.4 x 1.17m
Working Height: Models From 6 to12m
Platform Size: 2.4 x 1.17m
Rubber Tracked Elevated Work Platforms with Self-Levelling Riggers.
These compact, rubber-tracked scissor lifts are engineered to provide safe, stable elevated access up from 6 -12 metres working height across challenging indoor and outdoor environments. Featuring one-button hydraulic self-levelling straight top-out riggers, designed to achieve rapid, accurate stabilisation on uneven ground, helping to reduce setup time while maintaining safe operating geometry.
Its tracked undercarriage delivers superior traction and reduced ground pressure, making it well suited to soft surfaces, uneven terrain, and sites where surface protection and stability are critical.
Key Advantages
- 6 - 12 metre working heights suitable for a wide range of access tasks
- Rubber tracked undercarriage for improved traction and reduced ground impact
- One-button hydraulic self-levelling riggers for fast, accurate machine stabilisation
- Straight top-out rigger design to maximise platform stability at height
- Compact footprint for confined or restricted access environments
- High-capacity work platform for personnel, tools, and materials
- Smooth, controlled lift and descent for precise positioning
One-Button Hydraulic Self-Levelling Riggers
equipped with integrated hydraulic straight top-out riggers featuring single-button automatic levelling. This system is designed to:
- Automatically level the machine on uneven or sloped surfaces
- Reduce reliance on manual adjustments and operator judgement
- Improve stability before elevation
- Support consistent, repeatable setup procedures across operators
The rigger system is interlocked with machine controls to help ensure the platform is only elevated when the unit is correctly stabilised within allowable limits.
Safety & Standards Compliance
Designed and manufactured in alignment with applicable Australian and international standards for mobile elevating work platforms (MEWPs), including:
- ISO 16368 – Mobile elevating work platforms
- ISO 12100 – Safety of machinery – risk assessment and risk reduction
- AS 4024 – Safety of machinery (guarding, controls, and risk mitigation)
- AS 1418 – Applicable lifting and mechanical safety requirements
- AS/NZS 2550 – Safe use of lifting equipment (operational guidance)
These standards address structural integrity, stability, load control, emergency systems, guarding, and operator protection.
Integrated Safety Systems
Operator Protection
- Full-height guardrails with toe boards
- Non-slip platform flooring
- Platform overload protection
- Emergency stop controls at platform and ground level
Stability & Movement Safety
- Rubber tracked undercarriage for improved ground contact
- Hydraulic self-levelling rigger system with automatic cut-out
- Tilt and inclination monitoring with movement restriction
- Controlled hydraulic descent to prevent sudden lowering
Maintenance & Inspection Safety
- Mechanical safety props and service locks
- Clearly labelled inspection and service points
- Simplified control layout to reduce operator error
Designed for Safe Work Australia Compliance
When operated in accordance with the manufacturer’s instructions and Safe Work Australia guidance, the WP- 3-10 supports compliance with:
- Work Health and Safety (WHS) Regulations
- Working at Heights requirements
- Safe Work Method Statements (SWMS) and site-specific risk assessments
The use of a self-levelling tracked scissor lift can assist in reducing fall risks by providing a controlled, stable work platform in place of ladders or temporary access solutions where appropriate.
Typical Applications
- Construction and fit-out works
- Industrial and plant maintenance
- Electrical, mechanical, and HVAC installation
- Warehousing and logistics facilities
- Outdoor worksites with uneven, soft, or sensitive ground conditions
Important Safety Information
This equipment must only be operated by trained and competent persons. Operators must read and understand the operator’s manual and all safety instructions before use.
The Scissor Lifts must be used strictly within its rated load limits, working height, and operating conditions. The automatic levelling and rigger systems are designed to assist safe setup but do not replace the need for proper site assessment, ground condition checks, and ongoing operator vigilance.
Do not operate the machine in unsafe weather conditions, on unstable ground, or in proximity to live electrical services unless appropriate controls are in place. Regular inspections, maintenance, and servicing must be carried out in accordance with the manufacturer’s recommendations and applicable Australian Standards.
Failure to follow these requirements may result in serious injury, death, or property damage.
Stable Access Where It Matters
The 3-10 combines tracked mobility, one-button hydraulic self-levelling riggers, and comprehensive safety systems to deliver dependable elevated access in demanding environments. It is a practical solution for organisations seeking improved stability, reduced setup time, and compliance-focused design in a 6 - 12 metre class scissor lift.
Model | Scissor Lifts Rubber Tracks |
Safe Working Load (kg) | 320 |
Height (m) | From 8 -12m Model Dependant |
Platform Size (m) | 2.4 x 1.17 |
Outline Size (m) | Varies by Model and Height Requirement |
Overall Weight (kg) | From 2400kg - 3500 kg Model Dependant |
Extension Table (mm) | 900 |
WI-1214_1
WI-1214_2
WI-1214_3
WI-1214_4
Wild Imports
Looking for something for your business? Start a conversation with Wild Imports!
Give us a call on 0419 188 420 or fill in our contact form.